The washing machine clutch is an important part of the normal operation of the washing machine. So what is the washing machine clutch, what parts of its structure, what is the structure? What is the working principle of the washing machine clutch? All of these questions should all be worthy of the answer. Here Xiaobian to introduce some of the contents of the washing machine clutch.

   Washing machine clutch - define and construct accessories
   Automatic washing machine clutch full name slowdown clutch, the price of 90-180 yuan, which consists of several concentric axis, generally two to three. Clutch process by the cpu-relay - fork - gear - hug control, brake part is brakes, the same action process, but the last position is not the same. Is a gear clip, stuck that gear vats do not turn on the bottom of the turn of the water turn, not when the card is the whole barrel turn. Washing machine clutch to achieve the two functions of washing and dehydration conversion. General clutch is the same as the speed of washing and dehydration.

   Structure: The upper wash shaft and the dewatering shaft are concentric set construction.
   The middle section is equipped with a brake disc. The lower end is fixed with a clutch sleeve and a pulley, and the clutch wheel is provided outside the spring. The current pulsator automatic washing machine usually uses the slowdown clutch, the structure of the deceleration clutch is shown in Fig. 1, Fig. 2 and Fig. 3, which is mainly composed of pulsating axle, dewatering shaft, torsion spring, brake belt, fork, clutch, ratchet , Pawl, clutch sets, jacket shaft and gear shaft and other components.

   Washing machine clutch - working principle introduced
   Principle: washing or stopping, the pawl (fork) will ratchet (gear) dial a certain angle, so that the spring and clutch release, into the washing state, the motor through the belt drive, only driven washing shaft rotation; The pawl holds the ratchet, and the spring rests the clutch and the dewatering shaft so that the clutch sleeve is rotated at the same time as the dewatering shaft. Torsion spring in the washing, hold the dehydration shaft, to prevent the dehydration barrel rotation. Brake strip control dewatering brakes.

   When the washing, the motor with the lower part of the washing shaft rotation, through the planetary gear reducer to the upper half of the washing shaft, driven by the wheel rotation. The speed ratio is 1 / 4.8. When the dehydration, the spring will wash the lower section of the shaft and the lower part of the dehydration axis hold, movement through the internal ring directly to the upper half of the dehydration shaft, driven dehydration barrel rotation, this time the planetary gear unit does not work.