This fault is the clutch pawl fork deformation or adjustment screw screw too deep, so that the working position of the pawl can not be in place, resulting in washing shaft and dehydration axis in the washing state is not separated due.
When the clutch pawl working position is not in place, the square wire clutch spring can not be loose, so that the washing shaft and the dehydration shaft are clutched by the clutch spring, and the dehydration shaft in the washing state again by the brake belt hold. When the clutch pulley clockwise forward, you can not drive the pulsator rotation. When the clutch pulley counterclockwise reversal, both the clutch side of the wire clutch spring rotation direction, so that the washing shaft and the dehydration axis separation; and clutch spring spring tightening direction, the dehydration axis is still tightened by the brake belt, when the wave The wheel can turn in reverse.
The appropriate adjustment of the adjustment screw, so that the pawl fork and brake lever clearance in the normal range, if the pawl fork fork deformation damage, can repair the pawl fork correction, serious replacement pawl fork to solve the problem There is no need for a clutch, nor is it a bearing that is broken. |
